Wiring-x86

Wiring-x86 is a Python module that lets you use Arduino like functionality on Intel® Arduino capable boards such as:

It provides a simple and unified API (similar to the WiringPi module) to talk to the GPIO pins on the board.

_images/galileo1.jpg

At the moment the Wiring-x86 library provides support to:

  • Writing to a GPIO pin configured as output.
  • Reading from a GPIO pin configured as high impedance input.
  • Reading from a GPIO pin configured as pullup input.
  • Reading from a GPIO pin configured as pulldown input.
  • Reading from a GPIO pin configured as analog input (ADC).
  • Writing to a GPIO pin configured as analog output (PWM).

Here is a simple example:

# Import the time module enable sleeps between turning the led on and off.
import time

# Import the GPIOEdison class from the wiringx86 module.
# In case you want to use a different board, simply the import right class
# below. The API is unified for all supported boards.
from wiringx86 import GPIOEdison as GPIO

# Create a new instance of the GPIOEdison class.
# Setting debug=True gives information about the interaction with sysfs.
gpio = GPIO(debug=False)
pin = 13
state = gpio.HIGH

# Set pin 13 to be used as an output GPIO pin.
print 'Setting up pin %d' % pin
gpio.pinMode(pin, gpio.OUTPUT)

print 'Blinking pin %d now...' % pin
try:
    while(True):
        # Write a state to the pin. ON or OFF.
        gpio.digitalWrite(pin, state)

        # Toggle the state.
        state = gpio.LOW if state == gpio.HIGH else gpio.HIGH

        # Sleep for a while.
        time.sleep(0.5)

# When you get tired of seeing the led blinking kill the loop with Ctrl-C.
except KeyboardInterrupt:
    # Leave the led turned off.
    print '\nCleaning up...'
    gpio.digitalWrite(pin, gpio.LOW)

    # Do a general cleanup. Calling this function is not mandatory.
    gpio.cleanup()

Contents: